Sheet Metal Rolling Machine / Maquina Para Lamina

TECHNICAL SPECIFICATIONS

Brief introduction of Sheet Metal Rolling Machine:

Technical Parameters of Sheet Metal Rolling Machine

Suitable material

Q235 color steel sheet;0.8-1.2mm

Forming speed

About 18- 20m/min

Power Requirement

Main motor power: 11X2 Kw(Depend on final design)                

Hydraulic station power: 5.5Kw(Depend on final design)                

Material of forming rollers                

No.45 steel, plated with chrome on surface.                

Material of cutter              

Cr12 mould steel with quench treatment, HRC58-60                

Material of shaft

High quality 45# steel, with heat treatment.

Roller grinder milling.

Shaft diameter

82mm

Controlling system

Mitsubishi PLC & converter

Total weight of machine

About 16500KGS

Machine's size

About 26m×1.8m× 1.5m (Depend on final design)                

Shipping

1x40GP and 1X20GP containers can load one machine


DESCRIPTION

Product application: The metal deck produced by floor deck forming machine is used as decking of building; It has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight. With the same bearing capacity, it economized steel and cuts down investment accordingly.

Roll Forming System

1、Roller material is high grade No.45 forged steel plated with hard chrome, by digital- controlled procession.

2、Strong wall connection for forming system to ensure machine 15 years long life.

Bearings inside rollers

Bearings inside the forming rollers to allow machine run with less loading, so that machine rollers not easy to be damaged to prolong machine life. More important, machine can get more precise sheet because of bearing designing.


High Accuracy

1、Shaft material is No.45 steel with diameter 72mm, strong and durable.Shafts for rollers are tooled by grinding machine 2 times. Ensure product accuracy.

2、Finished shafts from grinding machine,rollers on these shafts can ensure final sheet accuracy.


Automatic & Easy Operate

Mitsubishi PLC with touch screen. Friendly man-machine interaction.The system is simple to learn and easy to operate.

Automatic Operation:once you set quantity and length of product,machine will produce product automatically.


Control Quality Well

Zhongyuan factory is a "All-in-house source" from raw material to the final high-precision forming machine. All are done in our factory. Quality and delivery time can be controlled here.

Simple to install and easy to maintain.

You only need to connect some tubes and wires in your factory. Video and manual will show you how to do.

Our experienced technicians can supply overseas service.


APPLICATION

Product application of Sheet Metal Rolling Machine


In order to satisfy various customer requirements, we design and manufacture Sheet Metal Rolling Machine in different specs, models and configurations.


Sheet Metal Rolling Machine Application Example


PACKAGING

Packaging Details


1. One *40GP and one X20GP containers for loading one set of machine with mechanical decoiler; 

2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 

3.Spare parts and some small parts packed in plastic tooling box; 

4.All Components Fixed by steel wire with Container. Suitable for long time sea shipping. 

Delivery Time

Machine ready within 70 days after getting 30% deposit and confirming contract details from buyer and sellers.


Contact Us Today

Metal deck roll forming machine with flying cutting

High speed metal floor deck roll forming machine

High Speed Losacero Roll Forming Machine with SGS Inspection & ISO Quality System

15 Years Life Time High Quality Losacero Roll Forming Machine with SGS Inspection & ISO Quality System

Decking Roll Forming Machine