PU Sandwich Panel Production Line

DESCRIPTION

Brief introduction of PU Sandwich Panel Production Line:

PU Sandwich Panel Producing Line has been designed for the continuous production of metal faced roof and wall sandwich panels. Due to its simple operation. This PU sandwich panel making forming machine is widely used in the construction of steel structure enclosures,warehouse, workshop, cold storages and mobile buildings.


The metal skins for roof sandwich panels are trapezoildal roofing sheets made of pre-painted steel coils with thickness 0.4-0.7mm, width 1250mm maximum(we can design according to buyer's requirement).


Our PU sandwich panel Production line is one line that integrates advanced mechanical, chemical, electrical, hydraulic, and pneumatic technologies. 

In order to satisfy various customer requirements, we design and manufacture PU sandwich panel lines in different specs., models and configurations.


 Roll forming system 

 Rollforming machines to form panels up and down sheets. Lifetime can be more than 10 years.







 Double conveyor system 

 23m double belts conveyor make panels more even.






 Automatic band saw cutting system

 Band saw cutting style cut panels automatically according to set length.   







 Automatic Controller 

 Mitsubishi PLC controller with automatic mode and manual mode, realize continuous production.







TECHNICAL SPECIFICATIONS

Technical Parameters of PU Sandwich Panel Production Line:

PU Sandwich Panel Spec

Min. cutting length

3 meters 

Max. stacking length 15 meters
Panel width 1000mm (can be designed as per client's requirment)
Panel thickness Mini thickness 30mm (corrugated sandwich panel)

50mm (wall panel)

Max. thickness 150mm(exclude corrugated sandwich panel)

Steel Sheet Spec

Thickness

0.4-0.7mm color steel coils

Width

1250mm (we can design according to buyer's requirement)

Max. coil weight

10 tons

Inner Dia. of coil

508mm

Whole Line Spec

Working speed

About 3-7m/min (adjustable)

Total length About 105m

Working height

1200mm (height of panel coming out)

Pressure for foaming 

150-200 bar

Double belt conveyor

23m

Control mode   Mitsubishi PLC and converter
Total power  About 100Kw (as per final designing)

Power required

380V/3phase/50Hz or as per customer's requirement.

Air pressure

0.7Mpa (for buyer to prepare)

APPLICATION

Product application of PU Sandwich Panel Production Machine

Sandwich panel production line is always required for the production of metal skinned, PU board insulated roof and wall panels of prefab buildings, like assembled container houses,steel structure enclosures, warehouse, workshop, cold storages, and mobile buildings.

People like to use metal roof and wall panels made of pre-painted steel coils or galvanized steel coils instead of stones, bricks or clay tiles for most of residential, commercial, industrial and agricultural steel buildings, however a single metal roof or wall panel is not a thermal sheet which can prevent a building or a house getting too hot in summer or too  cold in winter.


Therefore  PU Sandwich Panel Production Machine tends to be the first choice to contractors or distributors whenever they have need to produce thermal roofing or wall panels. 


Sandwich Panel Application Example

PACKAGING

Packaging Details

1.Ten *40GP container for loading one set of machine ; 

2.the whole Wiped Anti Rust Oil, PLC controller covered by foam film; 

3.Spare parts and some small parts packed in plastic tooling box; 

4.All Components Fixed by steel wire with Container.

Delivery Time

Ship in 6 months after payment.


VIDEO

Contact Us Today

PU Sandwich Panel Forming Machine

EPS Sandwich Panel Production Machine