EPS Sandwich Panel Production Machine

DESCRIPTION

Brief introduction of  Eps Sandwich Panel Production Line:

EPS Sandwich Panel Production Machine has been designed for the continuous production of metal faced roof and wall sandwich panels. Due to its simple operation. This eps sandwich panel making forming machine is widely used in the construction of steel structure enclosures, warehouse, workshop, cold storages and mobile buildings.

The metal skins for roof sandwich panels are trapezoildal roof sheets made of pre-painted steel coils with thickness 0.4-0.7mm, width 1250mm maximum(we can design according to buyer's requirement); the thermal materials for roof and wall sandwich panels are usually EPS  board.


ESP sandwich panel production machine could make the polystyrene core sandwich panel. This sandwich panel product line adopts PLC and touch screen controlling system. It could make both roof and wall sandwich panel with core of polystyrene foam material. 


In order to satisfy various customer requirements, we design and manufacture EPS sandwich panel lines in different specs., models and configurations.


Consecutive laminating body makes EPS blocks stick to up and down sheets.

TECHNICAL SPECIFICATIONS

Technical Parameters of EPS Sandwich Panel Production Line

EPS Sandwich Panel Spec                

Panel thickness

Mini thickness

50mm (wall panel)

Max. thickness

200mm(exclude corrugated sandwich panel)

Steel Sheet Spec                

Thickness

0.4-0.7mm color steel coils

Width

1250mm (we can design according to buyer's requirement)

Max. coil weight

5 tons

Inner Dia. of coil

508mm

Whole Line Spec                

Whole line dimension

About 35000mm × 2500mm × 3000mm

Total weight

About 18t

Working speed

About 5-7m/min (adjustable)

The output

1500m2-2000m2/8hour

Control mode

PLC and converter

Total power

About 28Kw (as per final designing)

Power required

380V/3phase/50Hz or as per customer's requirement.

Air pressure

0.7Mpa (for buyer to prepare)

Suitable working temperature

About 25 degree  


APPLICATION

Product application of EPS Sandwich Panel Production Machine

Sandwich panel production line is always required for the production of metal skinned, EPS board insulated roof and wall panels of prefab buildings, like assembled container houses,steel structure enclosures, warehouse, workshop, cold storages, and mobile buildings.

People like to use metal roof and wall panels made of pre-painted steel coils or galvanized steel coils instead of stones, bricks or clay tiles for most of residential, commercial, industrial and agricultural steel buildings, however a single metal roof or wall panel is not a thermal sheet which can prevent a building or a house getting too hot in summer or too cold in winter.


Therefore an EPS Sandwich Panel Production Machine tends to be the first choice to contractors or distributors whenever they have need to produce thermal roof or wall panels. There are various connection or joint type for EPS roof and wall sandwich panels, like ‘H’ lock type, 'Z ' lock type, tongue and grooved type, concealed fixing type, cap fixing type, klip-lok type, cladding type and so on.

Sandwich Panel Application Example

PACKAGING

Packaging Details

1. Two *40GP containers for loading one set of machine with mechanical decoiler; 

2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 

3.Spare parts and some small parts packed in plastic tooling box; 

4.All Components Fixed by steel wire with Container. Suitable for long time sea shipping. 

Delivery Time

Machine ready within 80 days after getting 30% deposit and confirming contract details from buyer and sellers.


Contact Us Today

PU Sandwich Panel Production Line

PU Sandwich Panel Forming Machine