EPS Sandwich Panel Production Machine
EPS Sandwich Panel Production Machine has been designed for the continuous production of metal faced roof and wall sandwich panels. Due to its simple operation. This eps sandwich panel making forming machine is widely used in the construction of steel structure enclosures, warehouse, workshop, cold storages and mobile buildings.
The metal skins for roof sandwich panels are trapezoildal roof sheets made of pre-painted steel coils with thickness 0.4-0.7mm, width 1250mm maximum(we can design according to buyer's requirement); the thermal materials for roof and wall sandwich panels are usually EPS board.
ESP sandwich panel production machine could make the polystyrene core sandwich panel. This sandwich panel product line adopts PLC and touch screen controlling system. It could make both roof and wall sandwich panel with core of polystyrene foam material.
In order to satisfy various customer requirements, we design and manufacture EPS sandwich panel lines in different specs., models and configurations.
EPS Sandwich Panel Spec
50mm (wall panel)
200mm(exclude corrugated sandwich panel)
Steel Sheet Spec
0.4-0.7mm color steel coils
1250mm (we can design according to buyer's requirement)
Max. coil weight
Inner Dia. of coil
Whole Line Spec
Whole line dimension
About 35000mm × 2500mm × 3000mm
About 5-7m/min (adjustable)
PLC and converter
About 28Kw (as per final designing)
380V/3phase/50Hz or as per customer's requirement.
0.7Mpa (for buyer to prepare)
Suitable working temperature
About 25 degree
Sandwich panel production line is always required for the production of metal skinned, EPS board insulated roof and wall panels of prefab buildings, like assembled container houses,steel structure enclosures, warehouse, workshop, cold storages, and mobile buildings.
People like to use metal roof and wall panels made of pre-painted steel coils or galvanized steel coils instead of stones, bricks or clay tiles for most of residential, commercial, industrial and agricultural steel buildings, however a single metal roof or wall panel is not a thermal sheet which can prevent a building or a house getting too hot in summer or too cold in winter.
Therefore an EPS Sandwich Panel Production Machine tends to be the first choice to contractors or distributors whenever they have need to produce thermal roof or wall panels. There are various connection or joint type for EPS roof and wall sandwich panels, like ‘H’ lock type, 'Z ' lock type, tongue and grooved type, concealed fixing type, cap fixing type, klip-lok type, cladding type and so on.
Sandwich Panel Application Example
1. Two *40GP containers for loading one set of machine with mechanical decoiler;
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container. Suitable for long time sea shipping.
Machine ready within 80 days after getting 30% deposit and confirming contract details from buyer and sellers.
Contact Us For More Roll Forming Machine Detailed InformationYou can contact us either through phone number 0086-13867521382 within our working hours, or send an email to email@example.com, or send an inquiry form to us using "Inquiry Now" option. Our customer representatives will respond as soon as possible.