Get Familiar With Roll Forming Machine Used In Shaping Metal Roofing Panels

Publish Time: 2022-03-18     Origin: Site

The purpose of a roll-forming machine will be to fabricate specific configurations from the long metal strips, which are mostly coiled steel. In the majority of applications, the cross-section profile required of the piece will specifically be designed for that particular machine for forming the metal as needed.


Besides roll forming, all these machines can perform several metalworking duties, which include material cutting and also roll punching. The roll forming machines will work in a non-stop cycle for most of the part. The material will be fed into the machine and it will continuously make its way through different stages of operations, which end up with the completed final product.


This method will allow for the rapid shaping of metal roofing materials into many different shapes. From any simple corrugations to totally closed long shapes. Gradually, the metal will be shaped by preventing any extra stress on any particular area.


As the shaping of metal roof panels happens by drawing, hence in many cases, certain coiled sheet metal will pass through the machinery, and thus high volume production can be done.


Roll forming process


Any basic machine for roll forming has got a line that is separated into 4 major parts. The very first part is going to be the entry section and the corrugated roofing sheet is going to be loaded from here.


The material can usually be inserted either as a corrugated iron sheet form or also fed from any continuous coil. The subsequent section, which is the station rollers, where the real roll forming will take place, where each station will be located, and where all the metal will be formed shapes as it will make its way throughout the process.


These station rollers not only can shape all the metals, also they are the machine’s main driving force.


The cut-off device is the next section of this machine for basic roll forming, where the metal will be cut to a certain set length. Because of the speed, the whole machine works and also the fact that the machine is a continuous running machine, hence flying techniques of die cut-off are quite common.


Lastly, the final section, which is going to be the final exit station, where all the finished parts will exit the machine and go to a roller conveyor, and that is manually moved.


Advantages of roll forming machines

The following are a few benefits of these roll forming machines in comparison to any metal forming machines that are mostly meant for making an industrial steel profile or industrial aluminum profile.


  • High-volume capacity

  • More flexible and also responsive than any extrusion or press braking.

  • Ultra-precise processing can be done with very tight tolerances and excellent part uniformity as well as superior surface finishes can be achieved.

  • Can accommodate metals having variable surface coatings, dimensions, and flexibility

  • Can process higher-strength steels without any tearing or breaking

  • Can create lighter and stronger structural components by using less steel

  • These machines are very energy efficient as they do not spend energy to heat any material.


Now let us discuss metal roofing machines and also the manufacturing process here. The following materials are generally rolled in this profile sheet making machine.


  • Stainless steel that contains higher percentages of chromium that can offer corrosion or staining resistance

  • Aluminium, which is soft, lightweight, malleable, and has excellent corrosion resistance.

  • Galvanized where the metal surface features zinc-iron alloy coating

  • Copper which is a ductile metal having excellent electrical conductivity

  • Brass, which is a copper and zinc alloy that features bright and gold-like colour also having very high resistance to corrosion

  • Composites materials that are engineered  from 2 or more materials


In the sheet metal fabrication process, metal will be is pressed down in between 2 big rollers into a certain metal sheet which is a little thicker than any foil but will not be thicker than your dinner plate.


A roof roll forming machine manufacturer generally makes such a machine where sheet metal is properly formed. These formed sheet metals are commonly used for residential as well as commercial roofing. The quality of sheet metal may vary based on certain factors.


Most of the users of roofing sheet forming machine control can make a good quality of metal roofing materials for the consumers by using such machines.


Now let us discuss the process of making various roofing sheets by using various kinds of metals as needed by the consumers.


1.Manufacturing Metal Coil

In any aluminum roofing sheet machine, the most important stage is converting any raw material into a metal coil. To initiate the process first the metals will be purified and then converted into coils.

Then metal coils will run via a rolling machine for reducing the thickness and achieving the required grade that can vary based upon the raw materials.

2.Roller former

A corrugated roofing sheet forming machine is a roller former that can turn any metal coil into roofing panels and sheets. One can adjust this former for achieving the required panel designs.

The panel is made by feeding the various metal coilers into this machine to achieve any desired profile and curves. The successive roll will make the bend into effective metal roofing shapes.

3.Computer control unit

Most of the manufacturers of metal roofing sheets use a certain computer control unit for making any changes in the control, speed, operation, etc. A well-controlled computer unit can make it easy for adjusting these roll-forming machines as needed.

A smart computer can automate the manufacturing process after running the entire coil as needed and cutting various panels at certain specific lengths.

4.Sheet Metal

Besides the metal panels, plenty of other metal elements for roof manufacturing are needed such as accessories like a rake, ridge cap, drip edge, gable trim, sidewall, and also connectors for the roof to walls, etc. All these elements can be manufactured by a very detailed process for ensuring the efficacy of these panels.


The manufacturing of metal roofs involves many process steps and every process needs very close attention to maintain a high degree of quality standard.



Contact Us Today

Zhongyuan invites everyone to visit its booth at METALLOOBRADING 2024 in Moscow, Russia!

How to find the best China roll forming machine manufacturer?

Cold Roll Forming vs Hot Roll Forming: What's the difference?

Tips For Roof Roll Forming Machine Maintenance

Review Of 6 Best Roof Roll Forming Machine Manufacturers Of 2022